30
NETWORK CONFIGURATION
Cautions
It is necessary to forget any other around network and make sure the Android or iOS
device just connect to the Wi-Fi/Wireless network you want to configure. Make sure the
Android or iOS device Wi-Fi/Wireless function works well and can be connected back to
your original Wi-Fi/Wireless network automatically.
Kindly reminder:
User must finish all the steps in 8 minutes after powering on Dehumidifier, otherwise you
need to power on it again.
Using Android or iOS device to do network configuration.
• Make sure your mobile device has already been connected to the Wi-Fi/Wireless
network which you want to use. Also, you need to forget other irrelevant Wi-Fi
network in case it influences your configuration process.
• Activate the AP mode (Read the WIRELESS MODE IN OWNER'S MANUAL for detailed
operations.).
NOTE: There are two ways to finish the network configuration:
• Network configuration by Bluetooth scan
• Network configuration by select appliance type
Network configuration by Bluetooth scan
Note: Make sure the bluetooth of your mobile device is working.
1. Press “ + Add Device ”
2. Press “Scan for nearby devices”
4
30
man_wifi D720 Cube ('21) V3.indd 30man_wifi D720 Cube ('21) V3.indd 30 05-07-2021 14:1705-07-2021 14:17
To Next Page
Loading...
Need help?
General
