• Be sure the table/floor you are placing this
appliance can bear its weight
• Installation only in a location which is pro-
tected against cross aeration / air draft
• Convection air slots and rear ventilations
of the appliance shall nog be covered /
obstructed
• Do not put any flammable items on top of
the appliance
• This product can NOT be fixed to a wall of
roof
USAGE METHODS
Assembly of the appliance
FFB 207 (Fig.1)
Parts List:
• Fireplace body 1x
• Round Burner 1x
• Safety tray 1x
• Lid 1x
1. Unpack the appliance and accessories. Check the content for completeness
and any damages incurred in transit. Keep children away from the packing.
2. Only install or place on a solid floor of non-flammable material
3. Remove all packaging and information material before assembly
4. Read warning sticker covering the burner, then remove the sticker
5. If something is broken or damaged: do not use the appliance. Return the
appliance to your store immediately.
6. Place the burner into the burning chamber of the fireplace body.
Safe Way to (re-) fill the Appliance
• Before refilling the appliance after extinguished fire: make sure to WAIT FOR
AT LEAST 10 MINUTES.
• NEVER refill with a burning fire! (Fig. 2)
• Use a funnel for filling the appliance with bio ethanol. (Fig. 3)
• NEVER fill the appliance to a level above the max level indicator!
(Fig 4: max level indicator)
• Remove any spilled ethanol immediately – and before lighting! Use an
appropriate absorbent tissue.
• Use a long match or a long-end lighter to ignite. When igniting, keep a safe
distance at arm’s length. (Fig.5)
4
18