that they do not play with the appliance.
• In order to avoid overheating, do not cover
the device.
• Be sure the table/floor you are placing this
appliance can bear its weight
• Installation only in a location which is
protected against cross aeration / air draft
• Convection air slots and rear ventilations
of the appliance shall nog be covered /
obstructed
• Do not put any flammable items on top of
the appliance
• This product can NOT be fixed to a wall of
roof
USAGE METHODS
Assembly of the appliance
FFB 8060 (Fig 1)
Parts List:
• Fireplace body 2x
• 1.5L double-layer Burner 1x
• Control tool 1x
• Screws (5 x 30mm) 4x
• Tempered Glass 2x
• Screw (M6 x 10) 6x
• Screw cap 6x
1. Unpack the fireplace and accessories. Check the content for completeness
and any damage incurred in transit. Keep children away from the packing.
2. Only install or place on a solid floor of non-flammable material
3. Remove all packaging and information material before assembly
4. Assemble the fireplace base together and secure the glass onto the both
sides of the fireplace body with 6 screws.
5. Read warning sticker covering the burner, then remove the sticker
6. If something is broken or damaged: do not use the appliance. Return the
appliance to your store immediately.
7. Place the burner into the burning chamber of the fireplace body.
Safe Way to (re-) fill the Appliance
• Before refilling the appliance after extinguished fire: make sure to WAIT FOR
AT LEAST 10 MINUTES.
• NEVER refill with a burning fire! (Fig. 2)
• Adjust the sliding lid to its widest opening (Fig. 3)
4
18
To Next Page
Loading...
Need help?
General
