EasyManuals Logo
Home>Qlima>Air Conditioner>P522

Qlima P522 User Manual

Qlima P522
Go to English
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
G
Never turn the appliance off by unplugging from the mains. Always press
the button
, then wait for a few minutes before unplugging. This
allows the appliance to perform a cycle of checks to verify operation.
DESCRIPTION OF THE DISPLAY SCREEN
Plug into the mains socket, then the appliance is standby. Press the
button
to make the appliance turn on. The last function active when it was turned
off will appear.
COOL MODE
Ideal for hot muggy weather when you need to cooling and dehumidify the room.
To set this mode correctly:
• Press the M button a number of times until the
symbol appears.
Select the target temperature18°C-35°C(64 °F-90°F) by pressing the /\ or v
button until the corresponding value is displayed.
• Select the required fan speed by pressing the
button.
Three speeds are available:
Maximum speed: for maximum fan power
Medium speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
The most suitable temperature for the room during the summer varies from 24°C
to 27°C(75°F to 81°F ). You are recommended, however, not to set a temperature
much below the outdoor temperature. The fan speed difference is more
noticeable when the appliance is under FAN mode but may not be noticeable
under COOL mode.
HEAT MODE
* means only the heat pump model have this function.
To set this mode correctly:
• Press the M button a number of times until the
symbol appears.
Select the target temperature 13”C-27°C(55 °F-81°F) by pressing the /\ orV
button until the corresponding value is displayed.
• Select the required fan speed by pressing the
button.
Three speeds are available:
Maximum speed: for maximum fan power
Medium speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
• Water is removed from the air and collected in the tank.
When the tank is full, the appliance shuts down and ”
” (full tank) appears
on the display. The tank cap must be extracted and emptied. Run off all
water left into a basin. When all the water has been drained, put the cap
back in place.
• When the tank has been emptied, the appliance starts up again.
4
54

Other manuals for Qlima P522

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Qlima P522 and is the answer not in the manual?

Qlima P522 Specifications

General IconGeneral
TypeMonobloc mobile air conditioner
TimerYes
Noise level65 dB
Number of speeds3
Airflow (high speed)330 m³/h
Refrigerating mediumR410A
Cooling capacity (max)- BTU/h
Dehumidifying capacity0.7 l/h
Air conditioner functionsCooling, Dehumidifying
Cooling temperature range18 - 32 °C
Refrigerating medium weight410 g
Suitable for room volume up to75 m³
Cooling capacity in watts (max)2200 W
Heating capacity in watts (max)- W
Cooling energy efficiency (EER, W/W)2.6
Heating energy efficiency (COP, W/W)-
Current3.7 A
AC input voltage220-240 V
AC input frequency50 Hz
Energy efficiency class (cooling)A
Energy efficiency class (heating)No
Hourly energy consumption (cooling)0.8 kWh
Hourly energy consumption (heating)- kWh
Product colorWhite
Weight and Dimensions IconWeight and Dimensions
Depth690 mm
Width415 mm
Height315 mm
Weight24000 g
Package depth844 mm
Package width462 mm
Package height357 mm
Package weight28000 g

Related product manuals