IQ Hub v1.1
15/ 23
3.6 Interface Description
3.6.1 MIC
Internal MIC with outstanding sensitivity and high SNR makesit very suitable for recording
while suppressing the environment noise.
3.6.2 WIFI and BT
The IQ Hub supports 802.11 a/b/g/n/ac WiFi and BT 4.2. With a good performance internal
antenna, both WIFI and BT can achieve better connectivity.
3.6.3 Z-wave
The IQ Hub has the function of Z-wave (Fre: 908.4MHz-916MHz) connectivety so we can use
it in a lot of aspects such as access control, appliance control, AV control, building automation,
energy management, lighting,security, and sensor networks for the “Internet of Things”.
3.6.4 LTE (FCC ID: XMR201807EG91NA IC:10224A-2018EG91NA)
The IQ Hub supports LTE Cat 1 function, delivering M2M-optmized speeds of 10Mbps
downlink and 5Mbps uplink. And it features ultra-low power consumption which can extend
the battery lifecycle without DC adapter plugging in.
3.6.5 PowerG (FCC ID: WP3PGMODEMLP IC:1467C-PGMODEMLP)
RF Card, 912.75 - 919.106MHz, 56mm x 24.6mm
3.6.6 Speaker
IQ Hub has an internal 1 watt speaker
3.6.7 Buzzer
There is a high SPL buzzer in IQ Hub. It features high sound when turned on
3.6.8 Gas Gauge
A gas gauge is used to monitor the capacity of the li-polymer battery so we can figure out the
status of it precisely and immediately
3.6.9 Front Camera
IQ Hub has the ability to take beautiful photo and record the high resolution video.
3.6.10 RTC
IQ Hub has internal RTC so the system time can keep a long time if we didn’t turn it on.
To Next Page
Loading...
General