4.16 Test equipment
The test equipment menu provides several items of test equipment, which can be used to
diagnose faults in your radio, and even for other testing purposes too!
The diagram below shows the connection points for the test equipment on the QCX+. If you are
attempting to measure external equipment or circuits, then you will also need to make a
ground connection between the CW transceiver and the external circuit. Ground
connection pins are provided next to the corresponding input pins.
These items of test equipment are described below. All except for the signal generator, are
display-only items, with no corresponding stored configuration parameter.
QCX operang manual, rmware 1.07, manual edit 0.03 38
To Next Page
Loading...
Need help?
General
