EasyManuals Logo
Home>QSC>Speakers>K10

QSC K10 User Manual

QSC K10
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
Output Connections
K8, K10, K12
Both Channel A and Channel B have discreet direct outputs on female XLR connectors. The signal on this output is exactly equivalent to the signal
from the corresponding input. The level of the output signal is not affected by the gain setting for that channel. Additionally, signal delivered on the
RCA (phono) jacks is not present on the Channel B direct line level output.
The Post-Gain Line out female XLR connector is a mixed output of Channel A, Channel B and the RCA (phono) jacks. This mix is affected by gain
knobs on both Channel A and Channel B and the MIC/LINE switch on Channel A, but the output level is still Line Level.
WARNING! Do not connect the POST-GAIN LINE OUTPUT of a K Series system to any INPUT of the SAME UNIT. This output is
designed to send signal to OTHER K Series units or to other audio equipment. Failure to follow this warning may result in very
unpleasant sounds produced at extremely high output volumes.
Output Connections
KSub
Both Channel A and Channel B have discrete direct outputs on female XLR connectors. The signal on this output is exactly equivalent to the signal
from the corresponding input. The level of the output signal is not affected by the gain set on the subwoofer gain knob.
Channel A Line
Level Direct Output
Channel B Line
Level Direct Output
Channel A
Gain Knob
Post-Gain
Line Output
Channel B
Gain Knob
Channel A and B
Mixed Gain Knob
Channel B Line
Level Direct Output
Channel A Line
Level Direct Output

Other manuals for QSC K10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QSC K10 and is the answer not in the manual?

QSC K10 Specifications

General IconGeneral
Product colorBlack
LED indicatorsPower, Signal strength, Stand-by
Housing materialSteel
Recommended usageDJ
Suitable for outdoor use-
WooferYes
Speaker type2-way
Woofer diameter254 mm
Number of drivers1
Speaker placementFloor
Audio output channels1.0 channels
Woofer diameter (imperial)10 \
Subwoofer driver diameter (imperial)1.75 \
Impedance40 Ω
Sensitivity129 dB
Frequency range56 - 20000 Hz
RMS rated power1000 W
Peak Music Power Output (PMPO)2000 W
Connectivity technologyWired
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth300 mm
Width320 mm
Height519 mm
Weight14500 g

Related product manuals