Smart Module Series
SC206E_Series_Hardware_Design 21 / 115
Within operating temperature range, the module meets 3GPP specifications.
up to 5 Gbps on USB 3.1 and 480 Mbps on USB 2.0
⚫ Supports USB OTG
⚫ Used for AT command communication, data transmission, software
debugging, and firmware upgrade
Three UART interfaces: UART0, UART1, and UART4 (debug UART)
⚫ UART0: four-wire UART interface supporting RTS and CTS hardware flow
control
⚫ UART1: two-wire UART interface
⚫ UART4 (debug UART): two-wire UART interface used for debugging by
default
⚫ Supports SD 3.0
⚫ Supports SD card hot-plug
⚫ Two (U)SIM interfaces
⚫ Supports USIM/SIM cards: 1.8/2.95 V
⚫ Supports Dual SIM Dual Standby (supported by default)
⚫ Four I2C interfaces
⚫ Used for peripherals such as camera, sensor, touch panel, etc.
One generic ADC interface, up to 15-bit resolution
SC206E-CE/EM/NA:
Main antenna, Rx-diversity antenna, GNSS antenna and Wi-Fi/Bluetooth
antenna interfaces
SC206E-WF:
Wi-Fi/Bluetooth antenna interface
⚫ Size: (40.5 ±0.15) mm × (40.5 ±0.15) mm × (2.85 ±0.2) mm
⚫ Package: LCC + LGA
⚫ Weight: Approx. 10.3 g
⚫ Operating temperature range
4
: -35 °C to +75 °C
⚫ Storage temperature range: -40 °C to +90 °C
All hardware components are fully compliant with EU RoHS directive.
To Next Page
Loading...
Need help?
General
