Quick MILL 03035 User Manual

24
MOD. 0835 - 02835 - 03035
Fault Fault type Solution
Machine does not work (go on) Electrical Plug in the machine.
Electrical Check the fuses.
Little or no coffee dispensed
Hydraulic Fill the water tank.
Hydraulic Descale the machine.
Hydraulic Replace the lime filter
Hydraulic Clean filters.
Hydraulic Put the steam wand inside.
Hydraulic Reduce the amount of coffee in the filter holder.
Hydraulic Too fine grind.
Too much coffee is dispensed
Hydraulic Increase the amount of coffee in the filter holder.
Hydraulic Too coarse grind.
Hydraulic Decrease the coffee quantity device.
Coffee leaks from the dispensing unit
Hydraulic Put the filter holder in its seat correctly.
Hydraulic Clean the edge of the filter holder.
Hydraulic Filter holder seal worn and needs to be replaced.
Hydraulic Reduce the amount of coffee in the filter holder.
Cold coffee
Electrical Wait for the light to go out.
Hydraulic Put the filter holder in to warm it up.
Noisy pump Hydraulic Fill the water tank.
Hydraulic Replace the lime filter
Hydraulic Check the suction pipe to see if it is clogged.
11. TROUBLESHOOTING
Istruzioni 0835-02835-03035 18-07-2013 10:39 Pagina 23

Quick MILL 03035 Specifications

General

Brand	Quick MILL
Model	03035
Category	Coffee Maker
Language	English