22
MOD. 0980 - 0990 - 0995
QUICK MILL
Problem Type of anomaly Remedy
Machine does not operation (turn on) Electric Connect the machine to the electricity network.
Low or no coffee is being dispensed Hydraulic Fill the water tank.
Hydraulic Decalcify the machine
Hydraulic Clean filters
Hydraulic Reduce coffee quantity in filter holder.
Hydraulic Too fine ground coffee.
Too much coffee is being dispensed Hydraulic Increase the amount of coffee in the filter holder.
Hydraulic Too course ground coffee.
Coffee leaking from dispensing unit Hydraulic Insert the filter holder in its lodging.
Hydraulic Clean the edge of the filter holder
Hydraulic Filter holder gasket worn. Replace.
Hydraulic Reduce the amount of coffee in the filter holder.
Cold coffee in the cup Electric Wait for the light to turn off
Hydraulic Insert the filter holder for the pre-heating
Noising pump Hydraulic Fill the water tank.
11. TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
