Need help?Do you have a question about the Quick MILL MILANO 0980 and is the answer not in the manual?
General| Brand | Quick MILL |
|---|---|
| Model | MILANO 0980 |
| Category | Coffee Maker |
| Language | English |
Lists the specific coffee machine models this manual refers to.
Explains warning triangles and other symbols used for safety and information in the manual.
States manufacturer's non-responsibility for damages from misuse or unauthorized repairs.
Confirms product compliance with electrical waste disposal regulations.
Advises on safe handling and storage of packaging materials to prevent hazards.
Details safety measures for connecting the machine to power and managing the cable.
Lists essential operational safety checks and specifies installation environment requirements.
Emphasizes using original parts, proper storage, and guidelines for stacking packages.
Clarifies manufacturer's non-responsibility for damages due to improper installation or use.
Defines the machine's intended use in household and similar environments.
Clarifies what constitutes improper use and the associated risks.
Advises checking machine specifications against the electrical supply.
Discourages use of unapproved accessories due to potential injury.
Instructs on handling machine malfunctions and unauthorized repairs.
Lists specific precautions to prevent electrical hazards during operation.
Guides on immediate actions to take when the machine operates incorrectly.
Specifies water requirements, use of softeners, and connection procedures.
States that users with disabilities or lack of experience need proper instruction.
Details safety valves, thermal switches, and pump protection against overheating.
Mentions the presence of rubber feet to dampen vibrations during operation.
Identifies parts of the CAROLA model and lists its technical specifications.
Guides through the initial setup and water tank filling for the CAROLA model.
Details the step-by-step process for preparing coffee with the CAROLA machine.
Refers to Thermopid settings for adjusting boiler temperature on CAROLA.
Identifies parts of the MILANO model and lists its technical specifications.
Guides through the initial setup and water tank filling for the MILANO model.
Details the step-by-step process for preparing coffee with the MILANO model.
Explains how to use the steam wand for milk frothing on the MILANO.
Details the procedure for dispensing hot water from the MILANO.
Guides on how to adjust the coffee pressure valve on the MILANO model.
Identifies parts of the ANDREJA model and lists its technical specifications.
Guides through the initial setup and water tank filling for the ANDREJA model.
Details the step-by-step process for preparing coffee with the ANDREJA model.
Explains how to use the steam wand on the ANDREJA model.
Details the procedure for dispensing hot water on the ANDREJA model.
Guides on how to adjust the coffee pressure valve on the ANDREJA model.
Identifies parts of the ANDREJA DOSATA model and lists its technical specifications.
Guides through the initial setup and water tank filling for the ANDREJA DOSATA model.
Details the step-by-step process for preparing coffee with the ANDREJA DOSATA model.
Explains how to use the steam wand on the ANDREJA DOSATA model.
Details the procedure for dispensing hot water on the ANDREJA DOSATA model.
Shows and names the dosing keys for the ANDREJA DOSATA model.
Describes the function of each dosing key for the ANDREJA DOSATA model.
Explains how to change the pre-set coffee dose quantities for the ANDREJA DOSATA model.
Explains how to view and modify the boiler temperature set-point.
Describes how the energy-saving mode functions and how to exit it.
Details the procedure to engage the automatic energy-saving function.
Explains how to check if the automatic energy-saving mode is engaged.
Guides on how to enable and disable the pre-brew function on the machine.
Outlines the steps to reset the machine's factory default settings.
Guides on how to adjust the coffee pressure valve to increase or decrease pressure.
Describes the alarm for slow boiler filling and its resolution.
Explains the alarm for low water level and how to exit the condition.
Details the machine's behavior when dosing coffee without enough water.
Identifies parts of the RUBINO model and lists its technical specifications.
Guides through the initial setup and water tank filling for the RUBINO model.
Details the step-by-step process for preparing coffee with the RUBINO model.
Explains how to use the steam wand on the RUBINO model.
Details the procedure for dispensing hot water on the RUBINO model.
Identifies parts of the AQUILA and AQUILA PID models.
Lists and identifies all parts with letters for the AQUILA series.
Guides setup for tank water supply for the AQUILA model.
Guides setup for mains water supply for the AQUILA model.
Details the step-by-step process for preparing coffee with the AQUILA model.
Explains how to use the steam wand on the AQUILA model.
Details the procedure for dispensing hot water on the AQUILA model.
Describes the energy-saving mode operation for the AQUILA model.
Details the procedure to engage the automatic energy-saving function for AQUILA.
Explains how to check the status of the energy-saving mode for AQUILA.
Guides on how to adjust the pump pressure valve to increase or decrease pressure.
Describes the alarm for slow boiler filling and its resolution for Aquila.
Explains the alarm for low water level and how to exit for Aquila.
Details Aquila's behavior when dosing coffee without enough water.
Guides setup for tank water supply for the AQUILA PID model.
Guides setup for mains water supply for the AQUILA PID model.
Details the step-by-step process for preparing coffee with the AQUILA PID model.
Explains how to use the steam wand on the AQUILA PID model.
Details the procedure for dispensing hot water on the AQUILA PID model.
Details the procedure to engage the automatic energy-saving function for AQUILA PID.
Explains how to check the status of the energy-saving mode for AQUILA PID.
Guides on how to adjust the pump pressure valve to increase or decrease pressure.
Describes the alarm for slow boiler filling and its resolution for Aquila.
Explains the alarm for low water level and how to exit for Aquila.
Details Aquila's behavior when dosing coffee without enough water.
Identifies parts of the QM67 2 Boiler PID model and lists technical specifications.
Lists and identifies parts with letters for the QM67 2 Boiler PID model.
Guides through the initial setup and water tank filling for the QM67 2 Boiler PID model.
Details the step-by-step process for preparing coffee with the QM67 model.
Explains how to use the steam wand on the QM67 model.
Details the procedure for dispensing hot water on the QM67 model.
Details the procedure to engage the automatic energy-saving function for QM67.
Explains how to check the status of the energy-saving mode for QM67.
Guides on how to adjust the pump pressure valve to increase or decrease pressure.
Describes the alarm for slow boiler filling and its resolution for QM67.
Explains the alarm for low water level and how to exit for QM67.
Details QM67's behavior when dosing coffee without enough water.
Identifies parts of the VETRANO model and lists its technical specifications.
Guides setup for tank water supply for the VETRANO model.
Guides setup for mains water supply for the VETRANO model.
Details the step-by-step process for preparing coffee with the VETRANO model.
Explains how to use the steam wand on the VETRANO model.
Details the procedure for dispensing hot water on the VETRANO model.
Guides on adjusting the pump pressure valve for the VETRANO model.
Identifies parts of the VETRANO 2 Boiler PID model and lists technical specifications.
Lists and identifies parts with letters for the VETRANO 2B PID series.
Guides setup for tank water supply for the VETRANO 2B PID model.
Details mains connection and drip tray requirement for VETRANO 2B PID.
Details the step-by-step process for preparing coffee with the VETRANO 2B PID model.
Explains how to use the steam wand on the VETRANO 2B PID model.
Details the procedure for dispensing hot water on the VETRANO 2B PID model.
Describes the energy-saving mode operation for the VETRANO 2B PID model.
Details procedure to engage automatic energy-saving for VETRANO 2B PID.
Explains how to check the status of energy-saving mode for VETRANO 2B PID.
Guides on how to adjust the pump pressure valve to increase or decrease pressure.
Describes the alarm for slow boiler filling for Vetrano Dosata 2B PID.
Explains the alarm for low water level for Vetrano Dosata 2B PID.
Details behavior when dosing without sufficient water for Vetrano Dosata 2B PID.
Explains how to control the LEDs on Vetrano Dosata 2B PID models.
Identifies parts of Vetrano Dosata 2 Boiler PID and lists technical specifications.
Lists and identifies parts with letters for Vetrano Dosata 2B PID series.
Guides setup for tank water supply for Vetrano Dosata 2B PID.
Details mains connection and drip tray requirement for Vetrano Dosata 2B PID.
Details the step-by-step process for preparing coffee with Vetrano Dosata 2B PID.
Explains how to use the steam wand on the Vetrano Dosata 2B PID model.
Details the procedure for dispensing hot water on Vetrano Dosata 2B PID.
Shows and names the dosing keys for the Vetrano Dosata 2B PID model.
Describes the function of each dosing key for Vetrano Dosata 2B PID.
Explains how to change pre-set coffee dose quantities for Vetrano Dosata 2B PID.
Describes the energy-saving mode operation for Vetrano Dosata 2B PID.
Details procedure to engage automatic energy-saving for Vetrano Dosata 2B PID.
Explains how to check the status of energy-saving mode for Vetrano Dosata 2B PID.
Guides on enabling and disabling pre-brew function for Vetrano Dosata 2B PID.
Guides on how to adjust the pump pressure valve to increase or decrease pressure.
Outlines the steps to reset the machine's factory default settings.
Describes the alarm for slow boiler filling for Vetrano Dosata 2B PID.
Explains the alarm for low water level for Vetrano Dosata 2B PID.
Details behavior when dosing without sufficient water for Vetrano Dosata 2B PID.
Explains how to control the LEDs on Vetrano Dosata 2B PID models.
Explains how to access and set the desired boiler temperature.
Describes how to reconfigure the Termopid unit with default factory parameters.
Details alarms indicated by A1/A3 and A2/A4 for sensor issues.
Explains how to adjust temperature using micro switches on CAROLA Termopid.
Shows DIP switch settings for controlling boiler temperature on the 0960 CAROLA model.
Continues showing DIP switch settings for temperature control on 0960 CAROLA.
Continues showing DIP switch settings for temperature control on 0960 CAROLA.
Lists and identifies all included accessories for the coffee machine.
Provides instructions for keeping packages correctly positioned and handling them safely.
Details safe removal of packaging and initial inspection of the machine.
Specifies requirements for the electrical system, including residual current devices.
Emphasizes mandatory proper earthing and safe handling of the power cable.
Advises on placement in tight spaces and ideal surface characteristics.
Provides general advice on cleaning, including forbidden materials.
Details the step-by-step process for cleaning the coffee brew group using a blind filter.
Explains how coffee grind size affects extraction, taste, and crema.
Details the importance of purging and cleaning the filter holder before brewing.
Emphasizes grinding coffee beans just before use for optimal freshness and aroma.
Describes the pressing technique and cleaning of spouts for optimal extraction.
Specifies the recommended time range for coffee extraction (20-30 seconds).
Guides on steaming milk to achieve desired texture and temperature for beverages.
Details the technique for pouring milk to create decorative patterns in coffee.
Lists various coffee drinks with recommended preparation methods and ingredients.
Outlines essential daily cleaning tasks for the machine's exterior and components.
Details periodic cleaning tasks, including filter immersion for grease removal.
Explains the weekly cleaning of the coffee brew group using a blind filter.
Guides on how to decalcify the machine to remove mineral deposits.
Addresses problems related to damaged power cables and necessary repairs.
Lists checks for power, plug insertion, and circuit breaker status when the machine won't start.
Provides solutions for when the machine does not dispense coffee, including water level and pump overheating.
Identifies causes for inconsistent coffee delivery, such as filter cleanliness or grind size.
Offers solutions for issues with hot water or steam delivery, like low water or clogged nozzles.
Details steps for safely shutting down the machine for a temporary period.
Outlines procedures for permanent decommissioning and environmentally sound disposal.
To Next Page