DK Series
EN
QUICK DKSeries INSTALLATION AND USER’S MANUAL - REV005A
5
1.0 - Model code
1.1 - DK Technical Data
MODELS 3000 DC 3500 DC 4000 AC 5500 AC
MOTOR POWER 3000 W 3500 W 4000 W 5500 W
Motor voltage 24 V 230/400 V
Maximum instantaneous pull 3000 kg (6613.9 lb) 4000 kg (8818.5 lb) 4500 kg (9920.8 lb)
Maximum work load 1200 kg (2645.5 lb) 1500 kg (3307.0 lb) 1700 kg (3747.8 lb)
Work load 600 kg (1322.8 lb) 700 kg (1532.2 lb) 800 kg (1763.7 lb)
Current consumption at work
load
(1)
242 A 250 A 12.0 A 12.5 A
Max recovery speed
(2)
31 m/min (101.7 ft/min) 27.6 m/min (90.6 ft/min) 20 m/min (65.6 ft/min)
Recovery speed at work load
(2)
15.1 m/min (49.5 ft/min) 14.7 m/min (48.2 ft/min) 19 m/min (51.5 ft/min)
Minimum motor cable cross
section
(3)
70 mm 70 mm 2.5 mm 2.5 mm
Circuit breaker
(4)
100A (Quick) 150A (Quick) EC-BOX / INVERTER
Max Noise
(5)
Up to 80 DB
Deck thickness
(6)
30 ÷ 80 mm / 1”3/16 ÷ 3” 5/32 inch
Weight - model without drum 81.2 kg - 179 lb 82.2 kg - 181.2 lb 76 kg - 167.5 lb 77 kg - 169.75 lb
Weight-model with drum 86 kg - 189.6 lb 87 kg - 191.8 lb 81 kg - 178.6 lb 82 kg - 180.7 lb
MODELS HYDRAULIC
MOTOR TYPE REVERSIBLE GEAR TYPE
Displacement 17.9 cc 1.09 in3
Lifting capacity • 100 bar = 1400 kg • 200 bar = 2700 kg • 1450.4 psi = 3087 lb • 2900 psi = 5953 lb
Recovery speed at work load
(2)
50 l/min = 15 m/min 11.4 USG/min = 49 ft/min
Max Noise
(5)
Up to 80 DB
Deck thickness
(6)
30 ÷ 80 mm 1” 3/16 ÷ 3” 5/32 inch
Model weight
73 kg without drum
78 kg with drum
160.9 lb without drum
171.9 lb with drum
ADJUSTMENT VALUES
Flow rate 50 l/min 11.4 USG/min
Maximum pressure 210 bar 3045.8 psi
(1) After an initial period of use.
(2) Measurements taken with gypsy for 12/13 mm chain.
(3) Minimum recommended value for total length L= <20 m.
Determine the cable cross section according to the length of the wiring.
(4) With specic circuit breaker for direct current (DC) and delayed circuit breaker (thermal-magnetic or hydraulic-magnetic).
(5) Noise measured at one metre distance.
(6) Shafts and studs for greater deck thickness can be supplied upon request.
READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USING THE PRODUCT. IF IN DOUBT, CONTACT YOUR QUICK
®
DEALER.
QUICK
®
RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT
PRIOR NOTICE. IN CASE OF DISCORDANCE OR ERRORS IN TRANSLATION BETWEEN THE TRANSLATED VERSION AND THE ORIGINAL TEXT IN THE ITALIAN
LANGUAGE, REFERENCE WILL BE MADE TO THE ITALIAN TEXT.
1 - Information about the product
MODEL
POWER (W) DRUM (-/D)
CHAIN FALL (RH / LH)
VOLTAGE (V)
DK6 35 24 D Y
To Next Page
Loading...
Need help?
General
