Quooker PRO3-VAQ User Manual

Introduction
This guide contains two sections. You will have to determine the type of tank you have in order to
choose the correct section of this guide. There are two ways to do that:
1 By checking the type of Quooker tap you have.
In case you have a Flex tap, a Fusion tap or a Nordic boiling-water tap, you have an E tank.
Use the first section of this guide.
In case you have a Basic, Classic, Design or Modern boiling-water tap, you have a regular tank.
Use the second section of this guide.
Go to www.quooker.co.uk/collection if you are not sure.
2 By checking the serial number on your tank.
In case the serial number starts with 3 letters (VCF or CCW for example), you have an E tank.
Use the first section of this guide.
In case the serial number starts with 2 letters (VC or CC for example), you have a regular tank,
use the second section of this guide.
Tools
In addition to the supplied tools, you will need spanners to disconnect and connect the hoses:
- For an E tank, you will need spanners size 10, 14 and 24.
- For a regular tank, you will need spanners size 12, 14 and 24.
We recommend to keep paper towels within reach since some water will be left behind in the
hoses and tank.

Quooker PRO3-VAQ Specifications

General

Brand	Quooker
Model	PRO3-VAQ
Category	Water Heater
Language	English