Radial Engineering Catapult Series User Manual

True to the Music
®
Radial Engineering Ltd.
Catapult™ Audio Snake
SPECIFICATIONS*
* Subject to change without notice.
12
TX4 - RX4
Audio circuit type: Passive splitter
Frequency response: 7Hz ~ 20KHz
Total harmonic distortion: 0.0005% @ 1kHz
Dynamic range: 140dB
Gain: 0db/-0.8dB
Maximum Input: +35dBu
Minimum load impedance: 100 ohms
Common mode rejection: >103dB
TX4L - RX4L
Audio circuit type: Passive line splitter, transformer based
Frequency response: 7Hz ~ 20KHz
Total harmonic distortion: 0.0007% @ 1kHz
Dynamic range: 140dB
Gain: 0db/-5.7dB
Maximum Input: +35dBu
Minimum load impedance: 100 ohms
Common mode rejection: >113dB
TX4M - RX4M
Audio circuit type: Passive mic splitter, transformer based
Frequency response: 7Hz ~ 20KHz
Total harmonic distortion: 0.001%
Dynamic range: 140dB
Maximum Input: +35dBu
Minimum load impedance: 100 ohms
Intermodulation distortion: 0.003%
Common mode rejection: >113dB
Features
Handle: Makes it easy to move your catapult
Ground lift: Disconnects ground on RJ45 connector
General
Construction: 14-gauge steel chassis & outer shell
Size: L: 8” x W: 4.5” x H: 2”
Weight: 2.6 lbs
Warranty: Radial 3-year, transferable

Radial Engineering Catapult Series Specifications

General

Brand	Radial Engineering
Model	Catapult Series
Category	Cables and connectors
Language	English