Table of Contents Page
SW8 Overview........................................................ 1
Features and Functions.......................................... 2
Audio Connections ................................................. 3
Control Connections............................................... 5
Grounding Options ................................................. 6
Operation................................................................ 7
Signal Flow Block Diagram .................................... 8
Specifi cations ......................................................... 8
FAQ ........................................................................ 9
Warranty.................................................Back Cover
Radial Engineering Ltd.
1638 Kebet Way, Port Coquitlam BC V3C 5W9
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com • web: www.radialeng.com
www.radialeng.com
Radial SW8 Auto-Switcher
Combination Eight Channel Auto Switcher & Transformer Isolated Direct Box
Owner’s Manual
Specifi cations and appearance are subject to change without notice.
Copyright © 2007 Radial Engineering Ltd.
INTRODUCTION
Congratulations on your purchase of a Radial SW8™ Auto Switcher. The Radial SW8 Auto-Switcher is designed to provide redundant
backup for multi-track playback systems. This manual covers installation and operation of the SW8. We recommend that you take a
few minutes to read through this manual in order to familiarize yourself with the many innovative features incorporated into the SW8.
Inside, you will fi nd important safety features along with tips on how to get the most out of your SW8.
Should you have a questions on applications not covered in this manual, we invite you to log onto the Radial web site at
www.radialeng.com to check the FAQ (Frequently Asked Questions) section for the latest updates. Of course, you can also send us
an email at info@radialeng.com.
PERFORMANCE DISCLAIMER
The Radial SW8 is a electronic device designed to provide the means to backup other electronic devices. However,
like all electronics, the SW8 itself is not totally immune to malfunction. Because the SW8 is designed to integrate
with other devices to form a complete system, a critical malfunction may not be obvious until the system is asked
to perform. This makes it very important to test your complete playback system before each performance to ensure
your system is working as expected.
Radial Engineering Ltd. will not be held liable for any consequential or inconsequential costs or damages associated
with the use of the SW8. It is understood that connecting, testing and operating the SW8, along with the application
or miss-application, is the sole responsibility of the end user. For more details refer to the Radial limited warranty.
!
To Next Page
Loading...
Need help?
General
