Radio Shack 6-in-1 Remote Control User Manual

Need help? Call 1-800-989-4706
2
FEATURES
Your RadioShack 6-in-1 Remote Control can re-
place up to six infrared remote controls. You can
use it to control your TV, VCR, cable box, satellite
receiver, and even lights and appliances with
Plug ’n Power modules (not included).
The 6-in-1 remote is preprogrammed. All you
have to do is tell it which TV, VCR, or other com-
ponents’ remote controls you want to replace (by
entering 3-digit codes). This lets you operate
most of the same functions as the original re-
motes.
This manual includes a list of many manufactur-
ers’ 3-digit codes for TVs, VCRs, cable convert-
ers, CD players, satellite receivers, and other
popular remote-controlled devices.
The 6-in-1 Remote Control’s features include:
Powerful Infrared Beam
— so you can operate
your remote-controlled devices from a greater
distance than with many of the original remote
controls.
Li
g
hted Ke
y
pad
— lights up so you can see the
keys even in a dark or dimly lit room.
Timer
— lets you set the 6-in-1 to turn off your TV
after 60 minutes.
Plu
g
’n Power Functions
— allow you to oper-
ate Plug ’n Power modules with your 6-in-1 re-
mote and an optional IR command console (Ra-
dioShack Unlimited No. 10037703) or Plug ’n
Power Wireless Remote Control System (Ra-
dioShack Cat. No. 61-2676).
©
1997, 1998 Tandy Corporation.
All Rights Reserved.
Plug ’n Power and RadioShack are registered trademarks
used by Tandy Corporation.
X-10 is a registered trademark of X-10 (USA) Inc.
15-1923.fm Page 2 Monday, July 19, 1999 12:41 PM

Radio Shack 6-in-1 Remote Control Specifications

General

Brand	Radio Shack
Model	6-in-1 Remote Control
Category	Remote Control
Language	English