This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS
PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN
LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED
DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY,
REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge
for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used
in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current;
(b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
Limited 90 Days Warranty
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by RadioShack may cause interference and void the user’s authority to
operate the equipment.
Your turntable conforms to NRTL standards and meets all applicable FCC requirements.
Product: Lab 1200 Fully-Automatic
Belt Drive Turntable
Model: 42-7012
Responsible Party: RadioShack
100 Throckmorton
Fort Worth, TX 76102
Phone: 817-415-3200
Turntable Platter
Type .............................................................................................................................................................................................. Plastic
Outer Diameter.................................................................................................................................................. 11
13
/16 Inches (300 mm)
Drive System............................................................................................................................................................................ Belt Drive
Motor Type ............................................................................................................................................................................... DC Motor
Turntable Type ............................................................................................................................................................. Automatic Return
Rotation Speed........................................................................................................................................... 2-Speed 33
1
/3 and 45 RPM)
Tone Arm
Type............................................................................................................................................................................. Dynamic Balance
Effective Length.....................................................................................................................................................
11
/16 Inches (195 mm)
Overhang......................................................................................................................................................................
9
/16 Inch (15 mm)
Tracking Error..................................................................................................................................................................... Less Than 4°
Cartridge
Output Voltage ...................................................... 2.5 mv at 1 kHz (with LINE OUT ON/PHONO OUT OFF set to PHONO OUT OFF)
450 mv at 1 kHz (with LINE OUT ON/PHONO OUT OFF set to LINE OUT ON)
Frequency Response ...................................................................................................................................................... 20–20,000 Hz
Channel Separation (1 kHz)......................................................................................................................................... More Than 15 dB
Load Resistance .............................................................. 47 kohm (with LINE OUT ON/PHONO OUT OFF set to PHONO OUT OFF)
Tracking Force ................................................................................................................................................................. 3.5 ±1.0 Gram
Stylus
Tip .................................................................................................................................................................................. Diamond Stylus
Replacement ........................................................................................................................................................................ AT3600LAX
General
Signal-to-Noise Ratio (DIN-B)..................................................................................................................................................... > 50 dB
Wow and Flutter (JIS WARMS) at 3 kHz ................................................................................................................................... < 0.25%
Power Source ...........................................................................................................................................................AC 120 Volts 60 Hz
Power Consumption .................................................................................................................................................................... 3 Watts
Dimensions (HWD).................................................................................................. 3
13
/16 x 14
1
/4 x 13
15
/16 Inches (98 x 360 x 349 mm)
Weight .................................................................................................................................................................... 5 lbs 4 oz (2.38 kgs)
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice. Actual product
may vary from the product images in this document.
FCC Information
Specifications
If your turntable is not working as it should, these suggestions might help you solve
the problem. If the turntable still does not operate properly, take it to your local
RadioShack store for assistance.
My turntable does not work even though plugged into an AC outlet.
• Turn on the connected receiver/ amplifier.
• Check the rubber drive belt. It may have slipped, broken, or was not mounted
properly.
• Check the power cord and the AC outlet for a power problem.
No sound
• The receiver/amplifier volume is set to minimum. Adjust the receiver/amplifier
volume.
• Check to see if the turntable is connected correctly to receiver/ amplifier.
• LINE OUT ON/PHONO OUT OFF is set to PHONO OUT OFF and the
turntable is connected to the receiver’s/amplifier’s line level input jacks. Set
LINE OUT ON/PHONO OUT OFF to LINE OUT ON.
• Replace the stylus.
The sound from the turntable is unclear or scratchy during play.
• Clean the record.
• Clean the stylus with a soft brush.
• Check the stylus and reinstall it if necessary.
• Replace the stylus.
• LINE OUT ON/PHONO OUT OFF is set to LINE OUT ON and the turntable is
connected to the receiver’s/amplifier’s lowlevel phono input jacks. Set LINE
OUT ON/PHONO OUT OFF to PHONO OUT OFF.
There is a hum from the turntable during play.
• The stylus is improperly installed. Check the stylus and reinstall it if necessary.
• The turntable is picking up induction hum from other components. Check the
ground terminal and reposition the turntable away from other components.
• LINE OUT ON/PHONO OUT OFF is set to LINE OUT ON and the turntable is
connected to the receiver’s/amplifier’s lowlevel phono input jacks. Set LINE
OUT ON/PHONO OUT OFF to PHONO OUT OFF.
There is feedback or a howling sound from the turntable during
play.
• The turntable is picking up the sound pressure of vibrations from the
speakers. Reposition the turntable away from the speakers.
FAQ
Care
Keep the turntable dry. If it gets wet, wipe it dry immediately.
Use and store the turntable only in normal temperature environments.
To protect the stylus from damage, we recommend you replace the
stylus cover when you are not using the turntable.
Handle the turntable gently and carefully. Don’t drop it. Keep the
turntable away from dust and dirt. Wipe the turntable with a damp
cloth occasionally to keep it looking new.
Cleaning/Replacing the Stylus
A dirty or worn stylus causes rough, distorted sound and could
damage your records.
Caution: Do not touch the stylus while cleaning or installing it. If the
stylus gets dirty or dusty, use a soft brush to gently clean it. If the
stylus is worn, follow these steps to replace it. You can order a
replacement stylus assembly AT3600LAX through your local
RadioShack store.
1. Turn your receiver/amplifier off.
2. Remove the stylus assembly from the cartridge by gently
grasping its sides and pulling it down.
3. Insert a new stylus assembly and gently snap it into place.
Service & Repair
If your turntable is not performing as it should, take it to your local
RadioShack store for assistance. To locate your nearest
RadioShack, use the store locator feature on RadioShack's website
(www.radioshack.com), or call 1-800-The Shack (843-7422) and
follow the menu options. Modifying or tampering with the turntable's
internal components can cause a malfunction and might invalidate its
warranty and void your FCC authorization to operate it.
42-7012.fm Page 2 Thursday, April 22, 2004 1:38 PM
To Previous Page
Loading...
Need help?
Power
Turntable Specifications
Weight and Dimensions