Radio Shack Quick Printer II Operation Manual

Computer Graphics Operation Manual
---------- TRS·BO ® ----------
To Our Customers • • •
The TRS-8~® Computer Graphics package revolutionizes your
Model III by letting you draw intricate displays from simple
program instructions. With the highly-defined Graphics
Screen, the list of practical applications is nearly
endless!
The TRS-8~ Computer Graphics package includes a:
Computer Graphics Diskette
Computer Graphics Operation Manual
However, before you can use this package, your Model III
must have 48K of RAM (Random Access Memory) and one disk
drive. Your computer must also be modified by a qualified
Radio Shack service technician. The only difference you'll
notice is a cable which protrudes from the bottom of the
Model III case. Do not attempt to disconnect this cable!
This cable is provided to allow you to attach peripheral
devices (such as a hard disk) to the I/O Bus Jack of the
Model III. The cable connector which is attached directly to
the I/O Bus Jack (see Point A in the figure below) must be
firmly attached for the Computer Graphics package to work.
A
Included on the Graphics diskette are:
TRSDOS 1.3
Disk BASIC
Graphics BASIC (BASICG)
Graphics Subroutine Library (GRPLIB)
---------ltadI8Ihaell---------
-4-

Radio Shack Quick Printer II Specifications

General

Brand	Radio Shack
Model	Quick Printer II
Category	Desktop
Language	English