Cleaning CombiMaster
®
Plus
76 / 107
CleanJet
®
abort
In the event of a power outage or after switching off the appliance, "StOP" will appear in the
temperature display and the "Prog/Clean | START" button will blink.
If the "Prog/Clean | START" button is not pressed, the clean will run for another 30 seconds.
To abort, the "Prog/Clean | START" button must be pressed.
There are two different abort operations:
Abort if the cleaner or rinse aid tabs have not yet come into contact with water
Abort if the cleaner or rinse aid tabs have come into contact with water
Abort if the cleaner or rinse aid tabs have not yet come into contact with water
step info/button instructions
1 "STOP" will appear in the temperature display
2
To abort, the "Prog/Clean | START" button must
be pressed.
3_1
If the abort operation is confirmed, "tAb" and
"out" will appear one under the other.
The number of tabs previously placed will flash
alternately in humidity bars.
3_2
If the abort operation is confirmed, "tAb" and
"out" will appear one under the other.
The number of tabs previously placed will flash
alternately in humidity bars.
4
Open the door
Open the door and remove the tabs.
Close the door when all tabs have been
removed from the cooking cabinet.
5 Press the "Prog/Clean | START" button again.
To Next Page
Loading...
Need help?
General