Cleaning CombiMaster
®
Plus
68 / 107
Start clean
CleanJet
®
is the automatic cleaning system for cleaning the cooking cabinet. The 3
cleaning programmes allow you to adapt the cleaning process to the particular level of
soiling.
Attention!
- For hygiene reasons and to prevent malfunctions it is essential to clean your appliance every
day - risk of fire!
- Your appliance must be cleaned every day, even if it is only operated in "Steam" mode.
- Only use cleaner and rinse aid tabs from the appliance manufacturer. The use of other cleaning
chemicals can damage the appliance. Liability is not assumed for damages as a consequence!
- If you use excessive cleaning chemicals, this can cause foaming.
- Never place the tabs in the hot cooking cabinet (> 60 °C).
- Leave the appliance door slightly open if it is going to be idle for a prolonged period (e.g.
overnight).
- Cleaning the press-fit door gasket daily will extend the service life. Use a soft cloth and washing-
up liquid to clean the press-fit door gasket - do not use a scouring agent.
- Clean the glass panes inside and out and the outer panels of the appliance, ideally using a
soft, damp cloth. Do not use any abrasive or aggressive cleaning agents. Use mild household
washing-up liquid and regularly clean the steel with a steel cleaning agent.
To clean the appliance, the cooking cabinet temperature must be below 60 °C (see Cool
Down section)..
You can choose between CLE1 (for heavy soiling), CLE2 (for light soiling) and CLE3 (rinse
without tabs).
step info/button instructions
1
Turn the top dial to the "Prog/Clean | START"
button.
To Next Page
Loading...
Need help?
General