Need help?Do you have a question about the Raymarine R11XX and is the answer not in the manual?
Lists the technical specifications for the radar system components.
Guidance on planning the optimal placement for radar installation.
Provides instructions for mounting the radar display unit.
Instructions for mounting the R10XX radome antenna unit.
Instructions for mounting the R11XX open array antenna unit.
Details the electrical connection procedures for the radar system.
Specifics on connecting the radar system to a DC power source.
Information on interfacing the radar with external navigation devices.
Instructions for installing the XX Heading Sensor.
Wiring details for the XX Heading Sensor interconnection.
Wiring details for the INI-100 interconnection.
Procedure for installing the Seatalk Interface Option Kit.
Procedures for bonding radar equipment to minimize radio frequency interference.
Detailed explanation of each control button and its function.
Procedures for starting up and initially configuring the radar.
Steps for setting up the display before normal operation.
Step-by-step guide for powering on the radar system.
Instructions for safely powering down the radar system.
Overview of operations for controls located on the front panel.
Explanation of how to use the trackpad for navigation and selection.
How to use the range keys to adjust the radar's range scale.
Using the VRM key to measure distances to targets.
Using the EBL key to measure bearings to targets.
Selecting bearing modes (True, Relative, Magnetic) for EBL.
Using the cursor key to interact with screen elements and data.
Function of the Off Center key for adjusting the display origin.
Using the Zoom key to magnify specific areas of the radar display.
Function of the Enter key for confirming selections and data.
Using the Tune control for optimizing receiver performance.
Accessing and navigating the radar's menu system.
Setting and managing Guard Zones for target alerts.
Activating the Man Overboard function to mark a position.
Operating the transmit/standby and power control keys.
Guidelines for regular preventive maintenance of the radar system.
Procedure for replacing the main control PCB battery every two years.
Procedure for checking the operational status of the radar.
Adjustments required after initial installation for proper operation.
Guide to diagnosing and resolving common radar system problems.
Procedure for performing a master reset of the radar system.
Procedures for alignments and servicing components of the radar.
Procedures for finding and diagnosing faults in the radar system.
Procedure for compensating the magnetic sensor for accurate heading.
To Next Page
General
