Raymarine ST60+ Depth Instrument User Manual

Crop
Crop
Crop
Crop
Crop
Crop
Crop
Crop
Fold
Fold
Fold
Fold
+
When resettable data are
displayed, hold down for 3
seconds to reset the displayed
data to the current value.
RESET
OFFSET
Gives access to alarm
levels and alarm settings.
DEPTH
ALARM
Press to see the depth offset.
WATERLINE
offset
KEEL
offset
Current
depth
Minimum
depth
Maximum
depth
DEPTH
8 second timeout8 second timeout
DEPTH
Shallow alarm
Deep alarm
Shallow anchor
alarm
Deep anchor
alarm
To adjust an alarm level:
+
Select relevant
screen then press
to enter adjust mode.
or
In adjust mode, use
either
to set the alarm level
To leave adjust mode
1.
2.
+
Press
Note:
You can access alarm screens only
at master instruments.
On repeaters, the alarm button
has no effect.
3 s
Resets to
current
depth
Resets to
current
depth
3 s
Minimum depth
Maximum depth
DEPTH
D8335-1
Selects depth information.
Also gives access to
backlight adjust, contrast
adjust and power on/off
modes (see overleaf).
If incorrect offset values are applied,
this could result in misleading depth
information being displayed, with a
consequent risk of running aground.
Before using your Depth instrument,
refer to your ST60+ Depth Instrument
Owner's Handbook for information on
correctly setting the depth offset.
WARNING:
DEPTH
ALARM
OFFSET
RESET
ALARM
ALARM
OFFSET
RESET
OFFSET
RESET
OFFSET
RESET
RESET
RESET
General operation

Raymarine ST60+ Depth Instrument Specifications

General

Brand	Raymarine
Model	ST60+ Depth Instrument
Category	Marine Equipment
Language	English