Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
BEFORE YOU BEGIN
Remove contents from box. Inspect the contents of the box for scratches and/or dents that may have occurred during
shipping. Because your scooter was partially assembled and packed at the factory, there should not be any problems,
even if the box has a few scars or dents.
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
the warranty.
Required Tools
5 mm
Allen wrench
Product ID Locations:
1. Side of deck plate
2. Box - side of UPC (not shown)
Box Contents:
• Scooter
• Allen wrench
• Owner’s manual
Quick-release lever
Extension tube
Brake
T-bar
Collar clamp
To Next Page
Loading...
Need help?
General
