BEFORE YOU BEGIN
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
2
Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents that may have occurred during shipping. Because
your scooter was assembled and packed at the factory, there should not be any problems, even if the box has a few
scars or dents.
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied
at the time of sale was selected
on the basis of its compatibility
with the frame, fork and all other
parts. Certain aftermarket products
may not be compatible and will void
the warranty.
Product ID Locations:
(See location to the left)
1. Side of Deck Plate
2. Box - side of UPC (not shown)
Box Contents:
• Scooter
• Allen Wrench
• Owner’s manual
T-bar
Collar Clamp
LED Light-Up
Wheels (select
models only)
Quick-Release Lever
Extension Tube
Joint-Release Lever/
Pivoting Mechanism
Steering column adjusting screw
Kickstand
5 mm Allen Wrench
(included)
Required Tool
1.
To Next Page
Loading...
Need help?
General
