To Next Page

To Previous Page

Connections & Setup

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before use.

CAUTION: To reduce the risk of ﬁre or personal injury, use only

the Thomson Inc. approved Nickel-metal Hydride (Ni-MH)

battery model 5-2734, which is compatible with this unit.

1. Locate battery which is packaged inside a plastic bag and is separate

from the handset.

2. Locate the battery compartment on the back of the handset.

3. Plug the battery pack cord into the jack inside the compartment.

NOTE: To ensure proper battery installation, the connector is keyed and can

be inserted only one way.

Insert the battery pack.

5. Close the battery compartment by placing the handset back cover

slightly higher than the handset and then sliding the cover down into

position.

BATTERY

BLACK WIRE

RED WIRE

PRESS DOWN FIRMLY

Questions and Answers:

Need help?

Do you have a question about the RCA 25250 and is the answer not in the manual?

RCA 25250 Specifications

General