EasyManuals Logo
Home>RCA>Flat Panel TV>31Series

RCA 31Series User Manual

RCA 31Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18 Chapter 1 Connections and Setup
What To Expect
Watching TV
Remember:
Look for an
A
at the top of the screen to see if you're watching an analog
channel.
Analog video is sent in a 4/3 format, or your TV can display these channels in a16/9 format
by pressing the FORMAT button to view the different formats available. Go to
page 35 for
more explanation of screen formats.
Remember:
Look for a
D
at the top of the screen to see if you're watching a digital channel.
Most digital video is sent in a 16/9 format which does fill your screen, but it is sometimes sent
in 4/3 which does not fill your screen. It depends on how the station or source device is
formatting the video.
If there are bars on-screen, press the FORMAT button to try a
different format. This may eliminate the bars.
Some bars can't be removed because of
the way the format is sent by the broadcaster. Go to
page 35 for more explanation of screen
formats.
Changing Channels
Digital channels can have both primary channels (like the analog channel number) and
sub-channels. To tune to a digital channel with a sub-channel, such as 10.1, enter the
primary channel number (10), then press the right arrow button. Enter the sub-channel
number (1) and press OK.
Depending upon the type of signals you have connected to your HDTV, you might notice
that the channels change slower than you’re used to. This is perfectly normal. Digital cable
channels sometimes take longer to tune.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RCA 31Series and is the answer not in the manual?

RCA 31Series Specifications

General IconGeneral
BrandRCA
Model31Series
CategoryFlat Panel TV
LanguageEnglish

Related product manuals