8
LOADING A CD IN THE SINGLE PLAY SLOT
The single play slot lets you easily load a single CD. To
load a CD in the single play slot, press SINGLE PLAY/
ACCESS. The CD changer turns on if it was turned off,
and rotates the rack so the single play slot comes to the
loading position. Insert the CD with its label to the left.
Then press SINGLE PLAY/PLAY to start playing.
To remove a CD from the single play slot, press SINGLE
PLAY/ACCESS. The rack rotates the single play slot to the
front. When the rack cover opens, remove the CD.
The single play slot is numbered as “0” and is located
between discs 100 and 1. You can access this slot by
pressing DISC NUMBER 3 when the display shows 100,
or DISC NUMBER 2 when the display shows 1. You can
also reach to the single play slot by pressing 0 on the
remote control. The display shows the disc number as P0.
USING THE DEMO
The demo showcases the features of your CD-9400 and
its display. To turn on the demo, press 4 1 within 1
second of turning on the CD changer. To turn off the
demo, press any button.
To Next Page
Loading...
Need help?
General
