RCA CDRW121 User Manual

Recording
EN
11
1. Select source (analog/ optical/
coaxial) to match with external
input (e.g. MD)
External Recording Mode
2. Select auto/ manual track
numbering (see tip).
3. Enter recording mode.
4. Start recording.
6. Stop recording.
Synchronized Digital Recording
Mode (from External Source)
Synchronized Digital Recording enables fast and
easy digital recording. Track numbers are
automatically assigned as detected from the
digital source material. However, manual
assignment of track numbers is not possible.
1. Enter CD-SYNC mode.
2. Press repeatedly to select
between DISC SYNCREC
(whole disc) / TRACK SYNCREC
(one track) recording.
3. Confirm selection.
4. Synchronized recording is on standby.
Start playback of external source and
recording will start automatically.
5. Stop recording or recording
will be stopped automatically at
end of track or disc.
STOP
STOP
CD-SYNC
CD-SYNC
RECORD
5. Start playing source material.
O
K
O
K
Program Recording
1. Select Dual mode ON.
2. Load source disc on tray A and destina-
tion disc on tray B.
3. Refer to “Program” (steps 1-7, p. 9) to
create program on source disc (Tray A).
4. Refer to “Dubbing Mode” (p.10) for
program recording (Note: DISC DIGITAL
must be selected for step 4).
Microphone Recording
1. Connect microphone(s) into jack(s) and
adjust microphone level.
2. Refer to “External Recording Mode”
(p.11) for recording (Note: ANALOG must
be selected for step 1). With the recording
of your favourite music from external input,
you can sing along to make your own
digital recording.
Read tips on recording on the
next page!

RCA CDRW121 Specifications

General

Brand	RCA
Model	CDRW121
Category	CD Player
Language	English