Connect your existing antenna cable to the ANTENNA IN jack
of the Converter Box.
Connect the RF coaxial cable (supplied) from the OUTPUT TO
TV jack of the Converter Box to the ANTENNA jack of the TV
set.
Slide the CH3/CH4 selector on the back of the Converter Box to
the channel that is not in use in your area. The Converter Box
will send its video signal to either Channel 3 or 4 on your TV.
Connect the AC power cable of the Converter Box to a
suitable wall outlet.
Option 2: Your TV has Audio/Video jacks (red, white & yellow connectors)
Option 3: You also need to connect your VCR
1
2
4
3
Back of the RCA converter box
From antenna
AC120V
60Hz
1
2
3
4
Back of the RCA converter box
1
From antenna
2
3
Connect your existing antenna cable to the ANTENNA IN jack
of the Converter Box.
Connect the Audio/Video cables (not supplied) from the
Audio/Video OUT jacks (yellow, white, red) of the Converter
Box to the Audio/Video IN jacks on the TV set.
If there are more than two sets of Audio/Video jacks on the
TV set, connect only either AV1 or AV2 input jacks to those of
the Converter Box.
Connect the AC power cable of the Converter Box to a
suitable wall outlet.
1
2
3
Back of the RCA converter box
VCR
From antenna
1
2
3
4
AC120V
60Hz
AC120V
60Hz
6
Connect your existing antenna cable to the ANTENNA IN jack
of the Converter Box.
Connect the RF coaxial cable* (supplied) from the OUTPUT TO TV
jack of the Converter Box to the ANTENNA IN jack of the VCR.
Connect the RF coaxial cable* (not supplied) from the
ANTENNA OUT jack of the VCR to the ANTENNA IN jack of the
TV set.
Slide the CH3/CH4 selector on the back of the VCR to the
channel that is not in use in your area. The VCR will send its
video signal to either Channel 3 or 4 on your TV.
Slide the CH3/CH4 selector on the back of the Converter Box to
the channel that is not being used by the VCR; e.g., if you set the
VCR selector to CH3, slide the Converter Box selector to CH4.
Connect the AC power cable of the Converter Box to a
suitable wall outlet.
* You can also use Audio/Video cables (similar to option 2) if
the connection jacks are available on the VCR and TV.
1
2
3
4
5
SMART ANTENNA IN – For connecting a Smart Antenna. Refer to the antenna’s user manual for proper connection.
Option 1: Your TV has an antenna jack only
6
5
DTA800B_EN(QSG).indd 2DTA800B_EN(QSG).indd 2 12/6/07 10:59:26 AM12/6/07 10:59:26 AM
To Next Page
Loading...
Need help?
General
