Step 4: Initial setup of the Converter Box
1. Press BOX on the remote control to turn on the
Converter Box.
2. Press TV
(or use the TV remote control) to turn on the
TV set.
3. Press INPUT up to four times (or use the TV remote
control) to select the channel on your TV set to view
images from the converter box.
• The following screen can be seen on your TV when the
correct channel is chosen.
• If you cannot see the above screen on your TV set, check
that:
1) if the converter box has been turned on,
2) if you have programmed the remote control so that the
TV input channel can be selected correctly,
3) if you have correctly connected the TV set with the
Converter Box.
4. Press 1 (for English), 2 (for Spanish) or 3 (for French) to
select the menu language.
5. Press 1 to start automatic channel search.
• To improve TV signal reception, an optional Smart
Antenna which is compatible for connection with the
Converter Box is recommended.
• If a Smart Antenna is connected, press 1 for Quick Scan or
2 for Full Scan. A full scan with Smart Antenna may take
around 40-50 minutes.
• When the scan fi nishes, the Channel List menu displays the
found channels.
• Reposition the antenna and perform the automatic
channel scan again if you cannot fi nd all available
channels.
6. The Channel List shows after scanning, press
or to
highlight a channel and press OK to start viewing.
Your Converter Box is now ready for use!
Please read the User Manual for further details on
using the Converter Box.
Language
Choose the language to be used in the menu system.
English - 1
Español - 2
Français - 3
Menu text is displayed in English.
El texto del menú se exhibe en
español.
Le texte des menus est affiché en
français.
Language
Choose the language to be used in the menu system.
English - 1
Español - 2
Français - 3
Menu text is displayed in English.
El texto del menú se exhibe en
español.
Le texte des menus est affiché en
français.
Channel Scan
Begin - 1
Start channel search.
Channel scan will search for channels available in your
area. You may have to re-adjust the antenna and
retry the scan to capture all available channels.
Channel What's on Now What's on Next
2-1 KTVU Stored Current program Next program
2-2 KTVU Stored Current program Next program
4-1 KRON Stored Current program Next program
Channel List
DTA800B_EN(QSG).indd 4DTA800B_EN(QSG).indd 4 12/6/07 10:59:27 AM12/6/07 10:59:27 AM
To Previous Page
Loading...
Need help?
General
