If there are more than two sets of Audio!
Video jacks on the
lV
set, connect only
either AV1 or AV2 input jacks to those of
the Converter Box.
f3\
Connect the AC power cable of the
\V
Converter Box to a suitable wall outlet.
t::\
Connect the AudioNideo cables (not supplied)
o
from the AudioNideo OUT jacks (yellow,
white, red) of the Converter Box to the
AudioNideo IN jacks on the
lV
set.
AC120V
60Hz
Option 2: Your TV has AudioNideo jacks (red. white
&
yellow connectors)
f1\
Connect your existing antenna cable to the
\..V
ANTENNA IN jack of the Converter Box.
Option 3: You also need to connect your VCR
AC120V
60Hz
f1\
Connect your existing antenna cable to the
\..V
ANTENNA IN jack of the Converter Box.
f2\
Connect the RFcoaxial cable* (supplied) from
\V
the OUTPUT TO
lV
jack of the Converter Box
to the ANTENNA IN jack of the VCR.
f3\
Connect an RF coaxial cable* (not supplied)
\V
from the ANTENNA OUT jack of the VCR to
the ANTENNA IN jack of the
lV
set.
f4\
Slide the CH3!CH4 selector on the back of
~ the VCR to the channel that is not in use in
your area. The VCR will send its video signal
to Channel 3 or 4 on your
lV.
f5\
Slide the CH3!CH4 selector on the back of
\V
the Converter Box to the channel that the
VCR is not using; e'-g., if you set the VCR
selector to CH3, slide the Converter Box
selector to CH4.
f6\
Connect the AC power cable of the
~ Converter Box to a suitable wall outlet.
* You can also use AudioNideo cables
(similar to option 2) if the connection
jacks are available on the VCR and
lV.
DTA800.B
5
To Next Page
Loading...
Need help?
General
