RCA F32672SB User Manual

Using Your TV and Remote
With a Cable Box: Setting the Cable Channel
13
The Cable Channel works with CABLE on the remote. If the Cable
Channel is set, pressing CABLE selects the channel to see cable channels.
The Cable Channel setting depends on which channel your cable box
must be on to see cable channels. The channels usually used are 02, 03,
04, 05 or 06. Consult your cable company for more information.
A.Press TV to set the remote to
control the TV.
B. Press MENU•PROG to select the
Setup menu. This menu is
white.
A.Press MOVE H (down) to move
down the menu until Cable
Channel is highlighted.
B. Press E to underline the
channel.
A.Enter the number for your cable
box, either 02,03,04,05, or 06.
Press CHANNEL down until
“Disabled” is displayed to turn
this feature off.
1. Select the Setup menu
2. Highlight Cable Channel
3. Enter channel number
VCR 1 Channel: 00
Cable Channel: 02
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: 02
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: 03
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable

RCA F32672SB Specifications

General

Brand	RCA
Model	F32672SB
Category	TV
Language	English