Channel Bar
Press the DISPLAY button on the remote control, the channel bar will appear on the top right corner of the screen. It displays the
current channel's information. The following list describes the items on the channel bar.
A2/D50-1
MTV/KOCE-HD
Mono/English
480i/1080i
16:9/CC/TV-PG
Oct-31 23:14 Mon
ATV DTV
If the channel is analog, A is displayed. If it's a digital channel, D is displayed. For example, in the pictures
above, A2 is an analog channel, and D50-1 is a digital channel ( -1 is a sub-channel number).
Displays the channel label.
Displays whether the current channel is being broadcasted in stereo or mono. If the current channel is digital,
this space will be SAP (Second Audio Program) language.
Displays the signal resolution.
Displays the screen aspect ratio, closed caption and TV rating level of the current program or channel.
These are only available for digital channels.
Displays current date and time.
Adjusting Volume
Press the VOL+/VOL- button on the remote control to adjust the volume. If you want to switch sound off, press MUTE (1:_).
When OSD (On Screen Display) is not used, the arrows lefVright can also work as VOL-/VOL+ buttons.
EPG (Electronic Program Guide)
Press EPG button on the remote control, the electronic program guide will appear in the center of screen.
The electronic program guide gives the TV program playing project. You can use left/right arrows to switch pages.
22
To Next Page
Loading...
Need help?
General
