RCA RCD150 User Manual

EN
Tape Player
7
O
N
/
S
T
A
N
D
B
Y
BAND
EQ
DBBS
CLOSE
VOLUME
REC
PLAY
REW
FWD
STOP
EJECT
PAUSE
II
multifunction digital display
RADIO
TAPE
CD
T
O
P
LOAD S
T
E
REO C
AS
S
ETT
E
RE
C
O
R
D
ER
A
UT
O
S
T
O
P
SYST
E
M
Playing a tape
1. When the unit is off, press ON/STANDBY /
RADIO / TAPE / CD twice until TAPE mode is
selected. The tape indicator “CA” lights on the
display.
2. Press STOP/EJECT to open the tape deck
door.
3. Insert a tape into the door and push the
door closed.
4. Press REW or FWD to wind the tape to the
desired starting position. Press STOP/EJECT
to stop winding.
5. Press PLAY to start playback.
Press PAUSE to pause playback (press again
to release the button to resume playback).
Press STOP/EJECT to stop playback.
Recording to tape
From radio
1. Insert a tape into the deck.
2. Press ON/STANDBY / RADIO / TAPE / CD
until RADIO mode is selected.
3. Press BAND to access the desired radio band.
4. Press TRACK/TUNE or to tune to the
station to be recorded.
5. Press REC and PLAY together to begin
recording.
6. Press PAUSE or STOP to pause or stop the
recording respectively.
From CD
1. Insert a tape into the deck.
2. Press ON/STANDBY / RADIO / TAPE / CD
until CD mode is selected.
3. Insert the disc to be recorded.
4. Select the track or program to be recorded.
5. Press REC and PLAY together to begin
recording.
6. Play the track or program to be recorded.
7. Press PAUSE or STOP to pause or stop
recording respectively.
Note:Note:
Note:Note:
Note:
For better recording quality, use normal
bias tape (Type I) only.
Attention:Attention:
Attention:Attention:
Attention:
Be sure to slide the cassette into the tape
slot on the door. Do not place the tape
directly onto the tape mechanism.
RCD150 EN 1/16/04, 2:31 PM10

RCA RCD150 Specifications

General

Brand	RCA
Model	RCD150
Category	CD Player
Language	English