10
Highlighting and Selecting Menu Items
To navigate On-screen Menus, use the VOL UP/DOWN
and/or CHAN UP/DOWN keys.
VOL UP/DOWN keys move the cursor (or the highlight)
right/left. CHAN UP/DOWN keys move the cursor (or the
highlight) up/down.
For RCA, GE or PROSCAN products, press the MENU or
ENTER key to select the highlighted item. If menu items have
numbers next to them, you can use the number keys to select
an item. Additionally, the ENTER key can be used to select
menu choices.
For Sony products, pressing the ENTER key while
in Menu Mode returns you to the previous menu.
MENU
1. Make sure your components
are turned on and your TV is set
to the component's input.
2. Press the component key on
the remote (TV, VCR•DVD or
SAT•CBL•DTC).
3. Press the MENU key. The indicator
light blinks continuously to indicate
the remote is in Menu Mode and the
component’s menu should appear
on the TV screen.
VCR•
DVD
T
V
(BLINK)
This is an example of a DVD disc On-screen Menu.
English is the menu choice highlighted. Using this
remote control, you would press the ENTER key
to select English.
To highlight another language, you would press the
CHAN DOWN key (In the example above, the highlight
would move to Español).
Accessing a Menu System
This remote cannot access every menu system of all models
and brands of consumer electronics components. However,
if you’ve successfully programmed the VCR•DVD key to
operate a DVD player, you can access DVD disc menus with
the MENU key.
The MENU key will also access TV menu systems for
most RCA, GE and PROSCAN TV's, as well as some other
popular brands. Also, some RCA VCR menus are supported
by this remote’s menu key. This remote also supports select
satellite receiver menus.
If this remote’s MENU key doesn’t access the menu system
for your component, you’ll need to use the original remote
to change menu settings.
Note: This remote’s MENU key doesn’t support cable box
menu systems and some VCR menu systems.
Using On-screen Menus
SAT•
CBL•DTC
To Next Page
Loading...
Need help?
General
