Copyright © 2016 RCA Communications Systems
47
Prodigi
TM
RDR2000 Series Professional Digital Two-Way Radio Instruction Manual
press [ ] to select.
5. If the display shows VOX On. Press [ ]
to enable VOX, display shows VOX On. If
the display shows VOX Off. Press [ ] to
disable VOX and display shows VOX Off.
Controlling the Display Backlight
(RDR2550
TM
/RDR2600
TM
only)
You can enable or disable the radio’s display
backlight as needed. The setting also affects
the Menu navigation buttons and keypad
backlighting accordingly.
1. Press [ ] to access the menu.
2. Press [ or ] to navigate to Utilities
and press [ ] to select.
3. Press [ or ] to navigate to Radio
Settings and press [ ] to select.
4. Press [ or ] to navigate to Backlight
and press [ ] button.
5. If the display shows “Auto On”. Press
[ ] to enable the display backlight and
the display shows “Backlight Auto On”.
If the display shows “Turn Off” press
[ ] to disable the display backlight and
the display shows “Backlight Turn Off”.
Note: The display backlight and keypad
backlight are automatically turned off if the
LED indicator is disabled.
Talkaround
This feature toggles between repeater and
talkaround (direct) mode. If you are using a
repeater and your repeater is not operating or
you are out of it’s range, you can continue to
communicate during that time directly with
other radios within your group. This is called
“talkaround”.
Press the programmed Repeater / Talkaround
button to toggle between talkaround and
repeater modes or follow the instructions
below to use Menu of your radio (RDR2550
TM
/
RDR2600
TM
only).
1. Press [ ] to access the menu.
2. Press [ or ] to navigate to Utilities
To Next Page
Loading...
Need help?
General
