OPERATION
05
REVERSING THE DOOR POSITION
• Ensure the appliance is unplugged
and empty.
• Adjust the two leveling feet to their
highest position.
• We recommend you have someone to
assist you.
Note:
To take the door off, it is necessary to tilt the
appliance backward. You should rest the
appliance on something solid, e.g. a chair just
below the top panel.
DO NOT lay the appliance completely flat,
as this may damange the coolant system.
TOOLS REQUIRED
10 mm Socket Screwdriver
Phillips Style Screwdriver
FRIDGE COMPONENTS
1× Upper Hinge Bracket
1× each Leveling Foot
4× Machine Screw
1× Bottom Hinge Bracket
CAUTION
To avoid injury to yourself and/or property, we recommend someone assist you during the door
reversal process.
Remove the upper hinge cover, then unscrew the upper screws of the metal hinge bracket and
take off the hinge. Then take off the left side screw covers. Pull the appliance door upward to
take it off.
Remove the left leveling foot, the bottom hinge bracket by unscrewing the mounting screws.
2
1
To Next Page
Loading...
Need help?
General
