Combinedwith featuressuchasShuffle,Repeat,and
Programmedplay,the three CDchanger gives you lots
of options for playing CDs.
KNOWING YOUR BUTFONS
The following buttons are used for basic CD operation:
CD (function button) B Press the CD function button to
choose the CD player.
Track/Search Backward I_1_1<_] and Forward D{>l_lbl
• In Stop mode--- Moves you to the beginning of the
preceding or following track.
• In Play mode-- Press and release to move to the begin-
ning of the preceding or following track. Press and hold
to search.
Stop •- Stops play.
Play/Pause I_ -- This button works as a toggle switch: press
to begin play and to pause play.
LCD MESSAGES
The following LCD messages tell you what the CD player
is doing:
Message Meaning
cd CD function is active
dr I n CD drawer is in.
dr ou/_ CD drawer is out.
no
nP
n_
PF
,-ERd
dlSE
Remain time is unavailable. (Displayed
when the track number is beyond 32.)
There are no discs in the CD drawer.
No tracks are programmed (applies to
both Program and ATS modes).
No tracks are available in program play
mode or ATS mode.
Program is full (applies to both Program
and ATS modes).
Reading disc's table of contents (how
many tracks it has and the total time for
the disc). This information is displayed in
Stop mode.
Disc Indicator OPEN/CLOSE
Ughts button
m, Ii ,=_"-_"-_ 11_5 I
Seeing Is Believing
Whenever you close the disc drawer,
the CD player assumes that you put
a disc in each of the three trays so
that it doesn't have to waste time
checking. That's why all of the Disc
Indicator Lights come on when you
close the drawer. When the CD player
discovers an empty tray, it turns out
that tray's Disc Indicator Light.
Look for this Logo
You can play 3" and 5"
compact discs that have
this logo.
DIGITAL AUDIO
7
To Next Page
Loading...
Need help?
General
