RCA RP8085 User Manual

Using the CD Player
EN
9
Using Auto Track Skip
(ATS)
ATS is the opposite of programmed play. Rather
than programming into memory the tracks that
you want to hear, with ATS you set the unit to
skip those tracks that you don’t like.
Creating an ATS Program
1. Press ATS to activate the feature. The VFD
display will be similar Fig. 3 with a flashing
disc number and “_ _”.
2. Press DISC SKIP or Direct Disc Access keys to
choose a disc.
3. Press NEXT/ PREV or Numerical Keys to
choose the first track to be skipped.
4. Press OK to add the seleced track to the ATS
program.
5. Repeat the preceding steps to add more
tracks to the ATS program.
6. Press PLAY/PAUSE to begin playing the ATS
program.
Recalling and Editing the ATS
Program
Editing the ATS program is a lot like editing a
regular program.
1. Press ATS to go to Auto Track Skip mode.
2. Press OK to move to the next program
number unitl you get to the programmed
track you want to change.
3. Press DISC SKIP or Direct Disc Access keys to
choose the disc, and then press NEXT / PREV
or Numerical Keys to choose a replacement
track.
4. Press OK to change the current skipped track
to the one you just selected.
Fig. 3
Assigning CD Titles and
Play Order
STEP 1- Assigning CD Titles
1. Press CD TITLE to activate the feature. CD
TITLE will flash on display.
2. Press OK to confirm the activation.
3. Press NEXT or PREV to select alphabets.
4. Press OK to confirm the selections.
5. Repeat step 3 and 4 for further input.
6. Press CD TITLE twice for finalising the CD
title.
Tip: you can press
REVERSE/ FORWARDREVERSE/ FORWARD
REVERSE/ FORWARDREVERSE/ FORWARD
REVERSE/ FORWARD to shift the
cursor during titling.
STEP 2 - Programming Play Order
After assigning the CD titles, you may program
the play order as well.
1. Press CD TITLE once right after assigning CD
title, INPUT PROG will flash on display.
2. Press OK to confirm the activation.
3. Press CLEAR to choose the playback status
(ON - to be played or OFF - to be skipped),
and then press OK to confirm status and
change to the next track.
4. Press CD TITLE for the confirmation of the
play order.
Note: CD title program is only valid for normal or
repeat mode but not in shuffle, ATS, program, intro or
peak search mode. However, you can still edit the CD
title in any playback mode.
CD TEXT
ATS TIME
RANDOM
1 ALL PROGRAM
REPEAT
SHUFFLE DISCS MIX TRACK PEAK
MIN
STEP SEC
1
2
4
5
3
1
234
5
6
7
8
9
10
11
12
13
14
15
Clearing the ATS Program
Clearing the ATS program is also a lot like
clearing a regular program.
1. Press ATS.
2. Press and hold CLEAR until CLEAR shows on
the display.
RP8085 IB 4/5/00, 9:49 AM10

RCA RP8085 Specifications

General

Brand	RCA
Model	RP8085
Category	CD Player
Language	English