To Next Page

To Previous Page

Install USB & Micro SD Card (TF)

Install USB device:

1. Press the button to turn oﬀ power and the power indicator will light RED.

2. Install the USB device into USB port.

3. After connect, press the button to turn on unit and power indicator will light GREEN

4. Press the button to USB mode, use / to search the ﬁle and /

to start play back.

Notes: Remove USB device , press the button to turn oﬀ power FIRST.

Install Micro SD Card ( TF ) device:

1. Press the button to turn oﬀ power and the power indicator will light RED.

3. After connect, press the button to turn on unit and power indicator will light GREEN

Insert the Micro SD Card into the TF card slot.

This TF card can not support hot plug. make sure this function working properly.

Please insert the TF card before power on.

4. Press the button to TF mode, use / to search the ﬁle and /

to start play back.

Notes: Remove Micro SD Card , press the button to turn oﬀ power FIRST.

Questions and Answers:

Need help?

Do you have a question about the RCA RPJ116 and is the answer not in the manual?

RCA RPJ116 Specifications

General

Power Input Connect included adapter	DC 12V, 3A
Included Adapter Connect DC input of unit	Input AC100-240V, 50/60Hz Output DC12V, 3A.
Display Color	16.7K
Projection Size	30-100 inch
Speaker Power	2W + 2W
Signal Port	Video / VGA / HDMI
USB Port	Support USB device up to 32GB Support format mpeg1, Mpeg2, mpeg4, mp3, Jpeg
SD Card	Support SD card up to 32GB