Showing the Demonstration
Not operational in CD mode. Press DIMMER/DEMO
to turn on/off demonstration mode. The demonstra-
tion scrolls through all display operations.
DISPLAY TIMER/CLOCK
Setting the Time
1. Press and hold CLOCK until the hour flashes on
the display.
2. Press SKIP BACKWARD or SKIP FOR-
WARD to set the hour and then press
CLOCK to shift to minute digits.
3. Press SKIP BACKWARD or SKIP FOR-
WARD to set the minute.
4. Press SET to save settings and STOP to quit set-
ting.
Note: When system is ON, you can press CLOCK to
display the current time for about 2 seconds.
Setting the Timer
1. Press and hold TIMER until the ON appear with
the hour flashing ( ON - timer on time )
2. For setting time, press SKIP FORWARD /
BACKWARD to set the hour and then
press TIMER to shift to minute digits.
3. Press SKIP FORWARD / BACKWARD
to set the minute.
4. Press TIMER to change to OF (timer off time) with
hour flashing. Repeat steps 2 & 3 for timer off time
setting.
5. Press TIMER to select source. Press SKIP FOR-
WARD / BACKWARD to select
between CD /TUNER / TAPE)
6. Press TIMER to set volume. Rotate the VOLUME
knob to set desired volume level.
7. Press SET to save settings or STOP to quit setting.
Activating the Timer
Press and release TIMER to turn on/off
the alarm. The alarm is active when the
clock icon indicator is lit.
Adjusting the Display Brightness
1. Press and hold DIM-
MER/DEMO for more
than 2 seconds.
2. While the dimmer is dis-
played, press and release
DIMMER/DEMO to select the desired level (DIM 0 -
3).
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically. Press SLEEP on the
remote to select among 120, 90, 60, 45, 30, 15 & 5
minutes. (Remote Only)
5
EN
Display
DIM 2
To Next Page
Loading...
Need help?
General
