6
Sound Features
Preset Equalizer Curves
Press PRESET EQ on the main unit or EQ on the
remote to toggle among FLAT, ROCK, POP, JAZZ,
CLASS and CUSTOM. The display shows the selection
briefly.
Creating Custom Curve
1. Press PRESET EQ to select CUSTOM mode.
2. While "CUSTOM" is displayed, press DIGITAL
TUNING / to cycle among displayed
bass- and treble - range levels.
3. While BAS or TRE is
displayed, adjust
VOLUME CONTROL to
set the associated gain
between -10 - +10.
BASS BOOST
Press BASS BOOST to turn on/off boosting the bass
frequency.
Muting Audio
Press MUTE on the remote to cut the sound.
(Remote Only)
EN
CD Player
Note: Be sure to remove all discs from the disc
compartment before moving or transporting the
unit!
Loading Discs
1. Press SOURCE repeatedly to select CD mode.
2. Press OPEN/CLOSE to open the drawer.
3. Insert up to five discs with label face up. (Press
DISC SKIP to rotate the disc carrier.)
4. Press OPEN/CLOSE to close the drawer.
Loaded disc position icon lights.
Playing Discs
•Press PLAY/PAUSE to begin or pause play,
and STOP to stop play.
• Press SKIP BACKWARD / SKIP FORWARD
to select a specific track.
Tip: While playing a CD, press and hold SKIP-
FORWARD or BACKWARD for more than 2 seconds
to search through the CD.
This unit is compatible with
CD-RW/ CD-R discs for play-
back.
Notes on CD-R/RW Disc:
• Do not affix any type of labels to either side
(recordable or labeled side) of a CD-R/RW disc
as this may result in the unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do not
open the disc compartment door while the
disc is being read.
• Do not load an unrecorded CD-R/RW disc into
the unit. This may take a longer time to read
the disc.
• Playback capability for CD-RW discs may
vary due to variations in the quality of
the CD-RW disc and the recorder used to
create the disc.
To Next Page
Loading...
Need help?
General
