11
NOTES:
• The TV supports only its internal wireless network adapter—it does not support the use of a
USB network adapter. For the best viewing experience, we recommend using a wireless router
or access point that supports the following wireless networking standards, depending on your
TV model:
• If the wireless router supports DHCP, your TV can connect more easily to the wireless
network.
• If you apply a security system other than the systems listed below, it will not work with the
TV.
Security system: WPA, WEP, WPA2.
AC power
Plug your TV into a power outlet. You can tell that the TV has power because the status light on
the front of the TV lights up.
Remote control batteries
Open the back of your Roku TV remote control and insert the included batteries as indicated in
the label in the battery compartment. Reattach the back cover.
IMPORTANT NOTICE:
Depending on the country where the TV is installed, certain Roku channels may not be available.
The quick launch buttons on the remote control associated with those channels will therefore not
work. All other functionalities of the remote will work as designed.
To Next Page
Loading...
Need help?
General