63
Connections
TV With RF Jack and Digital Satellite
Receiver
This connection assumes:
• You have a basic digital satellite receiver and your TV
does not have audio/video input jacks.
This connection provides:
• Stereo sound playback from VCR, recording from a
digital satellite receiver, and recording one off-air or cable
channel while watching another.
To use this connection, you must have:
• (4) coaxial cables and (3) audio/video cables
• Position it above the VCR as shown. Make sure not to
block any of the VCR’s ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the
steps.
Using This Connection
• Tune your TV to channel 3 or 4, whichever one you
selected with the CH. 3/4 switch on the back of the VCR.
• To record and watch off-air or cable, tune your VCR to
channel 3 or 4 whichever one you selected with the CH.
3/4 switch on the back of the receiver. Turn off receiver.
• To watch and/or record from the digital satellite
receiver, tune your VCR to its line input. L1 appears in
display.
• Turn Auto TV/VCR feature to “ON.”
To play a tape:
1. Insert a tape.
2. If necessary, press the VCR button and then PLAY.
To record one off-air or cable program and
watch another:
1. Turn off the digital satellite receiver and begin
recording a program using a recording feature.
2. Press TV•VCR and select a different channel on the TV.
To record a digital satellite receiver program:
1. Turn on the receiver, tune the VCR to its line input, and
begin recording a program using a recording feature.
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT
IN
R
L
3 4
IN FROM ANT
OUT TO TV
CH3
CH4
SATELLITE
IN
S-VIDEO
L
R
AUDIO
VIDEO
CABLE/
ANTENNA
SATELLITE RECEIVER
VCR
TV
SATELLITE
SIGNAL
CABLE,CABLE OR
ANTENNA BOX
Caution
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
To Next Page
Loading...
Need help?
General
