EasyManuals Logo
Home>Redarc>Power distribution unit>SRP0120

Redarc SRP0120 User Manual

Redarc SRP0120
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
WARNING & SAFETY INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been
instructed on how to use the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Do NOT use the Regulator to charge non-rechargeable batteries. Doing so may result in harm to
the user and/or damage to the Regulator and/or Solar Panel. Only use the Regulator for charging
Standard Lead Acid, Calcium content, Gel & AGM type 12V batteries.
All lead acid batteries produce harmful, explosive gases. The Battery should be mounted in a well
ventilated area, as far as possible from any ignition sources. Do NOT smoke when in the vicinity of
the battery under charge.
Battery acid is a harmful substance. Care should be taken when working with lead acid batteries,
if the acid comes into contact with your eyes or skin, immediately wash the affected area with cold
running water and seek medical assistance. Eye protection and gloves should be worn when handling
lead acid batteries.
The Regulator will achieve best results when proper battery maintenance is regularly performed. This
includes but is not limited to checking water and specific gravity levels of the battery.
Warning! Check the manufacturers data for your battery and ensure that the ‘Maximum’ voltage of
the profile you select does not exceed the manufacturers recommended maximum charging voltage.
If the ‘Maximum’ voltage for your battery type is too high, please select another charging profile.
THE SOLAR REGULATOR
REDARC solar regulators ensure that the power supplied by your solar panels is at the right voltage to
charge your house or auxiliary batteries. REDARC solar regulators are PWM controlled and incorporate
automatic system voltage detection.
Our regulators are suitable for charging up to two separate battery banks and come in both 10A and
20A models which are capable of charging either 12V or 24V battery systems.
When two batteries are connected, the percentage of charge into either battery can be adjusted by
changing the priority setting.
SAL.FOR.Instruction Manual Solar Regulators – DOC393 – Version 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Redarc SRP0120 and is the answer not in the manual?

Redarc SRP0120 Specifications

General IconGeneral
BrandRedarc
ModelSRP0120
CategoryPower distribution unit
LanguageEnglish

Related product manuals