1. Press ON/OFF button to activate CWC.
GB
2. Place CWC on at surface under jockey wheel.
3. Jockey wheel must be placed in the centre of the CWC; the CWC
should not tilt.
4. When both triangles appear in the display area the jockey wheel weight
is recorded.
5. Press button
and place CWC in the centre in front of the wheel
which is ashing in the display.
6A+B. Drive slowly over the CWC. Press button
and drive the wheel
on the opposite side in same direction over the CWC.
7. By pressing the TOTAL button the total vehicle weight will be displayed.
The individual wheel weights can be displayed by repeating pressing of
the
button.
8. By pressing the buttons
and TOTAL simultanuously you can change
the weighing program from singel axle caravans/trailers and/or other ve-
hicles such as Motorhomes etc.
To Previous Page
General