Terminology
Some specific words used in this user's manual are defined below.
Host machine
This means a personal computer used to control the emulator.
User system
This means a user's application system in which the MCU to be debugged is used.
User program
This means the program to be debugged.
Programming Software
In this document, this indicates the Renesas Flash Programmer that can be used with the E2 or E2 Lite.
"#" at the end of a pin name (signal name)
"#" at the end of a pin name (signal name) indicates that the pin (signal) is active low (e.g., RES#).
To Next Page
Need help?
General
