RZ/T2M Group RZ/T2M Motor Solution Board Hardware Manual
R01AN5986EJ0100 Rev.1.00 Page 5 of 30
Jul.31.21
2. General specifications
2.1 Electrical specifications
Table 2.1 Electrical specifications
Power supply connector
Select one of the following on the inverter board
・FASTON Terminal
・Terminal block
・
Internal current consumption 3A or less
Excluding external motors and
encoders
* When using only the controller board, supply 24V DC from the center plus DC jack (P1701) of the controller
board.
* When supplying 24V DC to each of the inverter board and the control board, switch the jumper (P1) of the
inverter board to the 2nd to 3rd short side before use (do not supply 24V DC to the control board).
2.2 Environmental specifications
Table 2.2 Environmental specifications
Operating temperature limit
2.3 Board Size
Table 2.3 Board size
Controller board 170(W)×200(D)×1.6(T)
NO include protrusions,
NO include component height
Inverter board 170(W)×200(D)×1.6(T)
NO include protrusions,
NO include component height