NOTE: This Quick Start Guide covers installation of the DS-5 DVD.
1. Installation
Do not connect the JLINK LITE ARM debugger module until the software support has been installed.
1. Insert the DVD into your computer’s DVD-ROM drive. The DVD should automatically run the installation program. If
the installer does not start, browse to the DVD root folder and double click on ‘setup.exe’.
2. Windows™ 7/ 8 users may see “User Account Control” dialog box. If applicable, enter the administrator password
and click ‘Yes’.
3. The installer welcome screen will open. Follow the on-screen instructions to install the RSK software. This process
will take several minutes.
Note:
You will be prompted to obtain a product activation code by logging onto the My Renesas website. Please follow the on
screen instructions.
When prompted to specify a different location for installing any of the tools, it is recommended that default entries are
accepted.
The Windows™ driver signing dialog box may be displayed. Please accept the driver to continue.
Select the option to update the ARM DS-5 dll if prompted by the SEGGERJ-LINK DLL Updater.
To Next Page
Need help?
General
