Reolink RLC-1212A Operational Instruction

9 10
Specifications
Power: By PoE (802.3af)/DC 12V
Day/Night Mode: Auto Switchover
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Operating Humidity: 10%-90%
.
If the spotlight on your camera is not on, please try the following
solutions:
• Ensure the spotlight is enabled under Device Settings page via Reolink
App/Client.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check out the spotlight light
settings again.
Hardware Features
General
Spotlight is not On
Troubleshooting
If your camera is not powering on, please try the following solutions:
• Make sure your camera is powered properly. The PoE camera should
be powered by a PoE switch/injector, the Reolink NVR or a 12V power
adapter.
• If the camera is connected to a PoE device as listed above, connect the
camera to another PoE port and see if the camera will power on.
• Try again with another Ethernet cable.
If the picture from the camera is not clear, please try the following
solutions:
• Check the camera lens for dirt, dust or spiderwebs, please clean the
lens with a soft, clean cloth.
• Point the camera to a well-lit area, the lighting condition will aect the
picture quality a lot.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check out again.
Camera is not Powering On
Picture is not Clear

Reolink RLC-1212A Specifications

General

Brand	Reolink
Model	RLC-1212A
Category	Security Camera
Language	English